VOLKSWAGEN Fob Remote Programming Guide:

VOLKSWAGEN Fob Remote Programming Guide:

Welcome to the best online Car Key information resource on the Web. If you’ve got a problem with your Volkswagen Car Key Fob, programming it, or your switchblade Remote Car Key fob, you have just hit gold.

Scroll down to read FREE detailed, advice – normally only made available to Motor Trade Insiders – explaining how you can programme your Volkswagen Remote Fob or keyless entry system by yourself at home for free. The Volkswagen Key Programming secrets detailed below are 100% free and could save you £££ from your local Car Dealership.
AutoKey Squad Roadside Replacement Service for Car Keys
Remote Fob advice from AutoKey Squad Volkswagen Car Key Specialist

Click Here to buy a new Volkswagen Car Key Fob DIRECT. Avoid Dealer Fees.

Is your problem that your Car Key fob battery has run flat? Don’t worry! We can help. Click Here to read our Volkswagen FREE step-by-step battery replacement guide.

Alternatively, if you don’t have the time or skills to fiddle about, Click here to book an AutoKey Squad Car Key specialist to have the work done professionally.
VOLKSWAGEN:
VW Volkswagen Step-by-Step FREE Fob programming guide:
Remote Control Programming (1997 ON)
Procedure:
1. Switch Ignition ON and leave the key in the ignition.
2. Mechanically lock the vehicle using the Drivers door using a second
key.
3. Using the remote control press the Unlock button once, and the horn
will sound once.
4. Wait 6 seconds and press the unlock button once to activate the coding
procedure. The remote control will now be programmed.
NOTE : When performing programming on additional remotes the procedure
is the same, except you press the unlock button 2, 3 or 4 times for the
different remote.
For example : If programming 2 remotes press the unlock button twice with
a 1 second interval between each press, repeat for 3 and 4 remotes.
5. Switch Ignition OFF.
6. Remove key from ignition and check for operation.
7. The coding procedure can be repeated up to 4 times for additional remotes.
8. The ignition must be switched OFF between programming each remote
control.


Remote Control Erasing (1997 ON)
Procedure:
1. Switch Ignition ON and leave the key in the ignition.
2. Mechanically lock the vehicle using the Drivers door using a second
key.
3. Press the remote control unlock button 5 times in 1 second intervals.
A short horn will sound.
4. Wait 6 seconds and press the unlock button once to activate memory
erase.
5. Switch ignition OFF, all remotes are now erased.
(Technical Information supplied by Volkswagen Car Key Specialists AutoKey Squad.)
AutoKey Squad Volkswagen Car Key Specialist Caspar Moritz explains: “This advice will work to programme a Remote Fob for a wide array of Volkswagen vehicles including almost all Polos and Golfs & Passats.

“Some of the very latest remotes use a different keyless entry system, but whatever your model of VW, this procedure is well worth a try before you contact a Car Key Specialist. I used it most recently on a 2003 Espace to give you a guideline.”
We hope this advice from AutoKey Squad solved your Volkswagen Remote Fob or Keyless entry programming problem. If your remote is faulty or still not working, you should click here for a DIRECT quote on a new Volkswagen Remote Key Fob or replacement Car Key – avoiding Dealership charges.
Alternatively click here for more online advice on Volkswagen Fob programming:
Posted on by Harry
  • Our Services:

    • Stolen or Lost Car Keys Replaced
    • Quality Car Keys at
      Trade Cost
    • Locked Vehicles
      Opened fast
    • Remote Control Fob Supply & Programming
    • Broken Car Key Replacement
    • Trained Diagnostic Specialists
    • Guaranteed Quality Workmanship
  • coatofarms
  • cards
  • Video Guide:

  • Testimonials: