Welcome to the best online Car Key information resource anywhere on the World Wide Web!
Scroll down his Page for detailed step-by-step FREE in-depth advice explaining how to programme your Toyota Remote Fob.
- Remote Fob advice from AutoKey Squad Toyota Car Key Specialist
(Technical Information supplied by Toyota Car Key Specialists AutoKey Squad. Click Here to buy a new remote fob or replacement Toyota key)
AutoKey Squad Toyota Car Key Specialist John Austen explains: “This advice will work to programme a Remote Fob for a wide array of Toyota vehicles. It is designed specifically for the Toyota Corolla 2005 but will work on a wide array of Toyota vehicles from a similar era.”
Procedure:
Start with your Toyota Car Key out of the ignition. Open the driver door (all other doors are closed). Driver door is unlocked (other doors don’t matter).
Perform these steps within 5 seconds
Insert the key into the ignition (don’t turn it) Pull key out
Insert the key into the ignition (don’t turn it) Pull key out
Perform these steps within 40 seconds
Close, then open the drivers door.
Close, then open the drivers door.
Insert the key into the ignition (don’t turn it) and pull it out.
Perform these steps within 40 seconds
Close, then open the drivers door.
Close, then open the drivers door.
Insert the key into the ignition and leave in the ignition.
Close the drivers door
Turn the ignition to ON (as far as you can go without cranking the engine), then back to off .
Remove the key from the ignition.
Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
Perform these steps within 40 seconds
Press the lock and unlock buttons on the transmitter simultaneously for 1.5 seconds
Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock then unlock once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b as the remote was not accepted.
Open drivers door
Perform these steps within 5 seconds
Insert the key into the ignition (don’t turn it) Pull key out
Insert the key into the ignition (don’t turn it) Pull key out
Perform these steps within 40 seconds
Close, then open the drivers door.
Close, then open the drivers door.
Insert the key into the ignition (don’t turn it) and pull it out.
Perform these steps within 40 seconds
Close, then open the drivers door.
Close, then open the drivers door.
Insert the key into the ignition and leave in the ignition.
Close the drivers door
Turn the ignition to ON (as far as you can go without cranking the engine), then back to off .
Remove the key from the ignition.
Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
Perform these steps within 40 seconds
Press the lock and unlock buttons on the transmitter simultaneously for 1.5 seconds
Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock then unlock once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b as the remote was not accepted.
Open drivers door
You are done! If this process didn’t work, or your Toyota Fob is faulty and needs to be replaced, please call 0800 999 0121 or click here to buy a low-cost replacement from AutoKey Squad.
This information is supplied courtesy of this Toyota support website
